8
Cypress Confidential
Recommended Installation Workflow
1. Start with site survey
• Walk the site and note the types of thermostats to be retrofitted
• Determine where to place Repeaters, Hub and Green Box
• Determine power requirements, number (and type) of Repeaters and Green Boxes required
2. Stage components in the office as much as possible
3. Install and configure Green Box and Hub
• The Hub and Green Box should be installed first as the core of the network
• Define unique IDs to assign to each WPT and Repeater
4. Install and configure Repeaters
• Verify power has been installed
• Install and configure the Repeaters to setup WPT wireless network
5. Install WPTs
• Physically remove old thermostats and connect/mount WPTs in their place
• Configure WPTs to communicate with the wireless network
6. Commission system
• Calibrate WPTs
• Verify full system functionality
7. Customer walkthrough
• Train customer
• Setup customer specific items (alarms, schedules, etc.)
To Next Page
Loading...
