36
Cypress Confidential
Troubleshooting Tips
Make sure there is no other Receiver with
the same RKIT ID in operation nearby.
Another Receiver with the
same RKIT ID is in
operation nearby.
Transmitter shows a valid RSSI
reading even though the Receiver
is turned off.
Make sure there is no other Transmitter
with the same RKIT ID in operation nearby.
Another Transmitter with
the same RKIT ID is in
operation nearby.
Receiver is flashing its override
indicator even though the
Transmitter is turned off.
Make sure the RKIT ID on both devices are
the same
RKIT ID mismatch.
Both Receiver and Transmitter are
in range, but they have no
communication after range test is
started, i.e. Transmitter always
displays “--“ and Receiver is not
flashing its override indicator.
Check the batteries.
No batteries inserted,
batteries inserted
incorrectly, or batteries
are low
Either Receiver or Transmitter
does not display battery icon after
pressing any buttons.
Possible SolutionCauseProblems
Reference: WPT Wireless Range Tester Kit User Manual - Section 7
To Next Page
Loading...
