Need help?Do you have a question about the Cypress WPT and is the answer not in the manual?
General| Connectivity | Wi-Fi |
|---|---|
| Programmable | Yes |
| Wi-Fi Enabled | Yes |
| Touchscreen | Yes |
| Backlight | Yes |
| Power Source | Battery or Wired |
Outlines the goals and objectives of the Level 1 Certification Training program.
Details the main hardware components of the WPT system, including Green Box, Hub, Repeaters, and Nodes.
Explains the wireless technology used, its features like hybrid mesh, and network capacity limits.
Describes how the WPT network automatically forms and reforms when components are powered on.
Introduces the importance and process of conducting site surveys for WPT installations.
Lists the necessary tools and materials for conducting a thorough site survey.
Details questions to gather information about the existing HVAC system for installation planning.
Provides guidelines for identifying and selecting the correct WPT model based on existing thermostat types.
Step-by-step instructions on how to perform a wireless survey using the RKIT for optimal placement.
Explains the objectives of preparing WPT components off-site before installation.
Instructions on how to connect to the Green Box Controller (GBC) and access its web portal.
A lab exercise focusing on the initial setup and configuration of GBC and RWAL components.
Tips and default settings for GBCs, repeaters, and WPTs during the staging process.
Covers the installation procedures for the Green Box Controller (GBC) and the Hub.
Details on how to mount the GBC and connect it to power and the network.
Steps for mounting the Hub and connecting it to the Green Box via USB.
Instructions for installing and powering the wireless repeaters (RWAL).
Procedures for mounting the WPT thermostat, connecting pneumatic lines, and installing the cover plate.
Explains the different indicators and displays on the WPT's LCD screen.
Overview of the process to verify and ensure WPTs are functioning correctly.
Steps to check HVAC system response to WPT setpoint changes for direct acting thermostats.
A lab exercise focusing on calibrating the WPT and verifying its performance.
How to check the primary and secondary wireless signal strengths for WPTs.
A comprehensive checklist to ensure all installation and configuration steps are completed successfully.
Introduction to integrating the WPT system with BACnet networks.
Details the steps and considerations for integrating the GBC with BACnet.
Covers GBC configuration, node IDs, schedules, and network IDs for BACnet integration.
Information about the password-protected partner portal for accessing resources.
Provides contact details for customer support and available resources like website and manuals.
Lists relevant documents and their corresponding document numbers for further information.
To Next Page
