Cyrus ONE HD - Technical Specifications; Warranty and Disposal

Cyrus ONE HD User Instrucons
12
AV Direct mode is not setAV Direct mode is set
Follow the prompts on the app screen if you want to set •
or cancel AV Direct mode.
If no changes are made to the AV direct seng, the AV source
light will stop ashing to indicate that normal operaon has
resumed.
Connecng to a Home Cinema decoder
Connect the front le and right channels of the Home
Cinema decoder to the AV sockets on the Cyrus ONE
HD.
In Use
Select AV when playing a movie and a xed volume seng
will be applied. The front channel sound will play through
the Cyrus ONE
HD.
Volume operaon will return to normal when another input
is selected.
ADVANCED OPERATION
AV Direct mode
When AV Direct mode is set, the Cyrus ONE HD switches
to work as a power amp when the AV source is selected.
This means you can use Cyrus ONE HD as a high quality front
channel drive for a Home Cinema system.
CAUTION: Seng AV Direct mode will x the volume control
at a high level whenever the AV source is selected. Use this
seng only when the AV input is connected to the front
channels of an AV Home Cinema decoder, or with other
sources that include a volume control.
Seng AV Direct mode
The seng is changed from the ONE app.
Switch on the power.•
Touch AV Direct •
on the sengs screen.
The AV source indicator will ash and the volume indicators
will show if AV Direct is set.
Factory reset
Factory reset will clear all sengs including -
Last used volume and source sengs.•
Stored balance seng (restored to central seng).•
• Bluetooth pairing list.
AV Direct mode seng (when set).•
Reseng the Cyrus ONE HD
Factory reset can only be selected from the front panel
within 10 seconds of switching on the Cyrus ONE
HD.
Switch on the power.•
Within 10 seconds, turn the volume control an-•
clockwise six mes.
All front panel indicators will ash twice to conrm sengs
have been reset.