Cyrus Pre - Operation

INSTALLATION Cyrus Pre
English
8
Connecting a power amplifier with RCA phono cables
Connect a phono cable interconnect from the Cyrus Pre
Pre-out sockets
3
to the left and right inputs of the power
amplifier. When using the Pre-out sockets
3
, ensure that
no connection is made to the Balanced XLR sockets
17
and
18
.
Connecting a power amplifier with Balanced XLR
cables
Connect 3 pin XLR cables between the Cyrus Pre
balanced outputs
17
and
18
and the power amplifier XLR
balanced inputs. One cable will be necessary for each
channel, left and right. When using the Balanced XLR
outputs
17
and
18
, ensure that no connection is made to
the Pre-out sockets
3
.