Cyrus Pre - Additional Information

ADDITIONAL INFORMATION Cyrus Pre
English
16
KNOW YOUR
Cyrus Pre
Power control
•
When first powered up, the Cyrus Pre will run a self-
test, checking the internal functions and all the front
panel indicators in sequence. After completion of this
cycle the amplifier will revert to Standby mode.
When first switched on from standby the CD input is
automatically selected and the volume is set to
minimum.
•
When set to Standby the front panel settings for input
selection and Volume/Balance will be retained until
next used. If the unit is put in standby mode while set
to abnormally high volume levels, the Cyrus Pre will
power on at the safe level of -15dB when next
switched on.
Bi-amping / Tri-amping with the
Cyrus Power
•
Depending on the system complexity, two or more
Cyrus Power amplifiers may be daisy-chained to
provide fully separated quality power to the
individual units of the loudspeakers.
External Regulated Power Supply -
PSX-R
•
Addition of a PSX-R which is a highly regulated DC
power supply will upgrade the sonic performance of
your Cyrus Pre. No adjustments are necessary when
connecting the Cyrus PSX-R to the Cyrus Pre- full
connection instructions can be found on page 5.
Home Theatre- The
Cyrus AV-master
•
••
•
The Cyrus Pre can easily link to a Cyrus AV-master
surround sound processor to extend Cyrus sound
quality into a full Pro-Logic Home Theatre set-up
whilst retaining the Cyrus Pre as the core of the
stereo system.
V
olume and Balance control
•
The volume control system of your Cyrus Pre is a
unique twin attenuator design. This format enables
full implementation of short-path passive techniques
for the sensitive input signals, ensuring the highest
level of musical transparency.
•
The dual attenuators of each Cyrus Pre are
individually calibrated. This data is stored internally
in a calibration memory and is applied through dual
D/A converters and an analogue servo system to
obtain precision level setting and channel balance.