Need help?Do you have a question about the cytiva Biacore 8K and is the answer not in the manual?
General| Software | Biacore Insight Evaluation Software |
|---|---|
| Sample Throughput | Up to 96 samples per run |
| Number of Flow Cells | 8 |
| Data Analysis Software | Biacore Insight Evaluation Software |
| System Type | Surface Plasmon Resonance (SPR) system |
| Flow Cell | 8 flow cells |
| Temperature Control | 4-40°C |
| Flow Rate Range | 1-100 μL/min |
| Applications | Kinetics, affinity, concentration |
Explains the purpose, scope, and typographical conventions used in the manual.
Details critical user information, intended use, and prerequisites for safe operation.
Defines and explains safety notices like WARNING, CAUTION, and NOTICE.
Provides information on notes and tips for optimal product usage and troubleshooting.
Lists and describes user documentation delivered with the product and available online.
Explains Biacore terminology used in the manual.
Details general, flammable liquids, personal protection, installation, power, operation, maintenance, and decommissioning precautions.
Describes various labels found on the product and their meaning.
Details safety labels and other symbols attached to the instrument.
Describes how to perform emergency stops and procedures in case of power failure.
Identifies the main parts of the Biacore 8K and 8K⁺ instruments with diagrams and labels.
Describes the liquid supply, tubing inlet panel, buffer selector, pumps, and flow path.
Explains flow cell, sample compartment, and sample hotel temperature settings and their impact.
Details microplate preparation, covers, trays, and sample injection procedures.
Describes the sensor chip, surface plasmon resonance (SPR), and SPR response data.
Explains the Control Software, Evaluation Software, and software notifications.
Details space, environmental, electrical, and computer requirements for installation.
Covers unpacking, assembly, lifting, moving, and transport precautions for the instrument.
Provides steps for downloading and installing or repairing the system software.
Explains how to connect the instrument to mains power and to the computer.
Details steps to start the instrument and Control Software, including license and database setup.
Covers setting temperature, liquid supply, sensor chip, and methods for a run.
Guides on preparing samples/reagents and loading microplates onto sample trays.
Explains how to start, monitor, and clean up after a run, and enter standby mode.
Describes options for shutting down the Control Software based on system state.
Details regular maintenance schedule, required materials, and cleaning procedures.
Describes the conditions for storing the instrument for long periods.
Explains notifications and how to perform a system check for troubleshooting.
Lists common instrument problems and their possible causes and corrective actions.
Provides general specifications, environmental conditions, and operational parameters for the instrument.
Provides information on how to order the Biacore system and related products.
Lists compatibility of flow system components with various solutions and concentrations.
Contains information on decontamination, decommissioning, and disposal of the product and its components.
Provides contact details for support and troubleshooting reports.
Describes regulatory information and CE marking for the EU and EEA.
Details information applicable to the product in the Eurasian Economic Union.
Describes information applicable to the product in the USA and Canada, including FCC compliance.
Presents regulatory statements applicable to regional requirements, including South Korea.
Describes standards that apply to the product and regulatory compliance of connected equipment.
Provides product pollution control information as per Chinese standards.
Provides a form for on-site service to declare equipment safety and cleanliness.
To Next Page