D.A.S. D-100 - Technical Specifications

Manual del Usuario / D series amplifiers/ User’s Manual
12
SPECIFICATIONS
Parameter (Units) D-100 D-10 D-20
8 ohms
1400 450 625
4 ohms 2800 750 1150
2 ohms 3700 1150 2100
8 ohms 5300 1500 2300
4 ohms 7400 2300 4200
Additional Specifications
THD+N:(%)(4 ohms)@1kHz (@1dB below max output power) <
0,08 0,008 0,008
THD+N:(%)(4 ohms)@20Hz to 20kHz (@3dB below max output power) < 0,15 0,03 0,03
Gain Options (dB): 26/32/36 32 32/36
Sensitivity Options (for maximum power) (dBu): 16/10/6 3,5 7.5/3.5
Sensitivity Options (for maximum power) (Volts): 4.9/2.5/1.5 1,2 1.8/1.2
Frequency Response - 20Hz to 20kHz (dB): ±0.5 +0 / -0.5 +0 / -0.5
Input Impedance - Active balanced (k ohms):
Input CMRR (dB):
Hum & Noise (dB below max output): -105 -104 -106
Damping Factor: into 8 ohms:
Output Circuitry: D AB AB
Power Consumption: Nominal @ 240v (4 ohms)(A): 7 1,9 2,8
Power Consumption: Nominal @ 120v (4 ohms)(A): 14 3,8 5,6
Dimensions (mm): H x W x D: 88x482x460
Dimensions (in): H x W x D: 3,5x19x18,2
Weight: (Kg): 12 13,8 20,42
Weight: (lb):
Output Power (per channel) (Watts) (Crest Factor of 4.8)
26,4 30,36 44,92
Output Power (bridged) ( Watts)
20
>60
>400 @1kHz>200 @100Hz
3,5x19x16,9
88x482x428
Product improvement through research and development is an ongoing process at D.A.S.
All specifications are subject to change without notice.