53
52
Using the Configuration Utility in Router Mode (continued)
Tools > Time
Time Zone-
Select the time zone from the pull-down menu.
Daylight
Saving-
To select daylight saving time manually, select enabled or
disabled, and enter a start date and an end date for daylight
saving time.
Set the Time-
To manually input the time, enter the values in these fields
for the year, month, day, hour, minute, and second. Click Set
Time.
Default
NTP Server-
NTP is short for Network Time Protocol. NTP synchronizes
computer clock times in a network of computers.
This field is optional.
To Next Page
Loading...
