D-Link D DPH-50U DPH-50U - Changing the Default Settings

7.8 Changing the Default Settings
You can change the default settings for sending a call, activating a Skype™
call, switching between a Skype™ call and a regular call (call waiting) and
conference calling, by running the DPH-50U configuration.
Right click on the DPH-50U and select Configure as shown below.
You will see the configuration tab as shown below.
The Initiate Voip Call – press these keys to get a VoIP dial-tone. You can
now dial a SkypeOut™ call or a Skype™ speed dial call from your telephone
handset.
The Send Key – press this key following the phone number (or speed dial
number) when making a VoIP call.
The Call Waiting Sequence – press these keys during a call to switch
between a VoIP and regular call. For example to switch from a regular
telephone call to an incoming Skype™ call or to switch from a Skype™ call to
an incoming regular phone call.
The Conference Key Sequence – while on a Skype call and you receive a
regular call or while on a regular call and you receive a Skype call, press
these keys conference together the two calls.