and install the adapter properly.
Q3. DPH-50U does not appear to be responding to incoming
calls
There are several reasons why DPH-50U may not function.
• DPH-50U may not work properly with some 4 wire (multiline) phones
• Make sure the DPH-50U is connected to the PC and DPH-50U software is
running (green phone in the Windows System Tray).
• Make sure the handset is connected to the phone jack on the DPH-50U
and not the line jack
• If the Skype™ application was terminated for any reason while the
DPH-50U software was running, you will need to exit the DPH-50U
software and then restart it.
• Some telephone handsets require a battery to be installed in order to ring.
If your handset supports a battery, make sure there is a battery installed
and that the battery is not depleted.
Q4. Cannot hear dial-tone when I pick up the handset
connected to the DPH-50U
Check to make sure that the handset is connected to the correct jack on the
DPH-50U
Q5. Cannot hear the Skype™ call in telephone handset
Check to make sure that Skype is configured to use the D-Link Audio device
as it’s Audio In and Audio Out Sound Device.
This is done as following:
Select Options from the Skype™ Tools Menu as shown below.
To Next Page
Loading...
