D-Link DAP-1955 - Smart Connect Management

30D-Link DAP-1955 User Manual
Section 3 - Conguration
Smart Connect
Smart Connect Enable or disable the Smart Connect Feature. When enabled,
only a few conguration options are available to simplify
conguration.
Extended Wi-Fi - Smart Connect Enabled
Status Enable or disable the Extended Wi-Fi wireless network.
Wi-Fi Name (SSID) This is the name of the DAP-1955’s extended network. If
using Wi-Fi, the DAP-1955 will rebroadcast the uplink router’s
Internet connection under this SSID. You may also manually
set the SSID of the extended network.
Password Enter the password or network key that you wish to use for
the extended Wi-Fi network.
Security Mode Choose WPA/WPA2-Personal (recommended) or WPA3-
Personal.
Schedule Use the drop-down menu to select the time schedule that
the rule will be enabled for. The schedule may be set to
Always Enable or you can create your own schedules in the
Schedules
section. Refer to “Schedule” on page 35 for more
information.
YourRouter