AirPremier N Dual Band PoE Access Point Command Line Interface Manual
38
Utility/Miscellaneous Commands Description
version Display software version
help Display CLI command list
ping Send ICMP echo request to network hosts
pwd Print name of current/working directory
reboot Reboot access point
get country Display country
get uptime Display uptime
get hardware Display hardware revisions
get web Display Web information
set apply Apply the setting
set factorydefault Restore to factory default setting
set web Set Web status
set username Set login username (size:1--64)
set password Set login password (size:1--64)
ssl freset Use freset to execute a factory default
set location Set Location Data
get location Get Location string
set systemname Set System Name
get systemname Get System Name
set zonedefence Set Zone Defence status
set zone-defence-addip Add Zone Defence IP Address
set zone-defence-delip Del Zone Defence IP Address
get zonedefence Display Zonedefence
get zonedefence-ip Display Zonedefence IP table list