EasyManua.ls Logo

D-Link DCS-2102 - SECURICAM Network Camera

D-Link DCS-2102 - SECURICAM Network Camera
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
Router Setup
The following steps generally apply to any router that you have on your network. The D-Link DIR-300 is used as an example to clarify the configuration process.
Your WAN IP Address information will be listed on following window.
Note: Because a dynamic WAN IP address can change from time to time depending on your ISP, you may want to obtain a Static IP address from your ISP. A Static
IP address is a fixed IP address that will not change over time and will be more convenient for you to use to access your camera from a remote location. You can
use DDNS to obtain an IP address, please refer to page 27 for more information.

Related product manuals