Need help?Do you have a question about the D-Link DCS-2332L and is the answer not in the manual?
General| Maximum resolution | 1280 x 800 pixels |
|---|---|
| Supported video modes | 720p |
| Video formats supported | H.264, M-JPEG, MPEG4 |
| Minimum illumination | - lx |
| Sensor type | CMOS |
| Optical sensor size | 1/4 \ |
| Optical zoom | - x |
| Video motion detection | Yes |
| Built-in HDD | No |
| Compatible memory cards | SD, SDHC |
| Type | IP security camera |
| Certification | CE, CE LVD, FCC, C-Tick |
| Placement supported | Outdoor |
| Connectivity technology | Wireless |
| Form factor | Box |
| Product color | Black, White |
| Protection features | Water resistant |
| International Protection (IP) code | IP65 |
| Browser supported | Internet Explorer, Firefox, Chrome |
| Audio system | 2-way |
| Supported network protocols | TCP/IP |
| AC input voltage | 100-240 V |
| DC output current | 1.2 A |
| DC output voltage | +5V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 5.3 W |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | -20 - 50 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Depth | 45.7 mm |
|---|---|
| Width | 66 mm |
| Height | 105.1 mm |
| Weight | 255 g |
Describes how to verify the camera setup and registration within the mydlink account.
Instructions for installing the camera setup wizard on Windows systems.
Instructions for installing the camera setup wizard on Mac systems.
Shows the live video feed from the camera and explains viewing resolutions.
Contains options to control camera operation and general settings.
Provides access to advanced camera configuration options through a separate window.
Explains how to access and use the camera's web configuration utility.
Details how to operate the camera's live video feed and controls.
Guides users through camera setup and configuration using wizards.
Configures network connectivity, wireless settings, and dynamic DNS.
Configures image properties, video profiles, and audio settings.
Covers advanced settings like presets, motion detection, events, and recording.
Configures the Infrared Cut-Removable filter and IR light for low light conditions.
Allows installation and activation of HTTPS certificates for secure camera access.
Sets IP address-based access permissions for viewing the camera.
Guides users on how to update the camera's firmware to the latest version.
Details the camera hardware, image features, video compression, and resolution.
Lists network protocols, security features, and external interfaces.
To Next Page
