D-Link DCS-2332L - Installing a Microsd Memory Card; Reattaching the Bottom Panel

16D-Link DCS-2332L User Manual
Section 1: Product Overview
Reattaching the Bottom Panel
Step 1:
Seat the protective panel, ensuring a tight t with the inlaid rubber seal.
Step 2:
Replace the two screws. Ensure that the screws are tightened rmly.
Step 3:
Firmly replace the protective rubber screw coverings.
Note: To ensure that the camera stays weatherproof, users are advised to ensure that all the rubber
seals are secured rmly in place.
Installing a microSD Memory Card
Step 1:
Follow the steps outlined in Removing the Bottom Panel on page 15.
Step 2:
Insert a microSD memory card into the slot, with the notch facing right.
Step 3:
Follow the steps outlined below in Reattaching the Bottom Panel.
2
2
3
4