D-Link DCS-2332L - Recording Settings

36D-Link DCS-2332L User Manual
Section 3: mydlink
Select this option to enable the automatic recording when motion
is detected.
Add Detection Area: Click on this icon to draw areas that
will trigger automatic recording when motion is detected.
Remove Detection Area: Click on this icon to erase areas
from regions that trigger automatic recording when
motion is detected.
Clear Detection Area: This will remove all detection
areas
Refresh Snapshot: This will refresh the current snapshot
of the monitored area.
Increase/Decrease Sensitivity: Increase the motion
detection sensitivity
Toggles e-mail notication on or o.
In the event that the microSD card cannot store further recordings,
the user can choose to record over previous recordings or to be
notied and cease recording.
Record video clips when
motion is detected:
E-mail Notication:
Video Clips Recording
Mode:
Recording Settings