EasyManuals Logo

D-Link DCS-5222LB1 User Manual

D-Link DCS-5222LB1
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
25D-Link DCS-5222LB1 User Manual
Section 4 - Conguration
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to
congure your new D-Link Camera and connect the camera to the
Internet. Note that this wizard will not register your camera with
mydlink.com.
Click Next to continue.
Select Automatic IP Address if you want your DHCP server (usually
enabled on your router) to assign the camera its IP settings. If you
want to manually assign the IP settings, select Static IP Address and
enter the following details:
Enter an IP address for your camera.
Enter the subnet mask of your network.
Enter the default gateway address. This is
usually the IP address of your router.
Enter the primary DNS servers IP address. This
is usually the IP address of your router.
Enter the secondary DNS servers IP address.
This is optional.
If you are required to connect using PPPoE,
select Enabled and enter the Username and
Password for your PPPoE connection. Only select
this option if your camera is directly connected
to your broadband modem. If it is on a network
with a router or gateway, do not select this
option.
Click Next to continue.
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DCS-5222LB1 and is the answer not in the manual?

D-Link DCS-5222LB1 Specifications

General IconGeneral
BrandD-Link
ModelDCS-5222LB1
CategorySecurity Camera
LanguageEnglish

Related product manuals