D-Link DCS-5222LB1 - Sound Detection

44D-Link DCS-5222LB1 User Manual
Section 4 - Conguration
Sound Detection
Check this box to enable the motion detection feature
of your camera.
Species the measurable level that would indicate
sound. Please enter a value between 50 and 90, the
higher the number the more sensitive the camera
will be to sound.
Enabling Sound Detection will allow your camera to use the built-in microphone to trigger events with audio. If this option is selected, the trigger
by option under SD recording, Video Clip, or Snapshot should also be selected.
Enable Sound
Detection:
Detection Level:
After making any changes, click the Save Settings button to save your
changes, or click the Don’t Save Settings button to discard your changes.