D-Link DCS-5222LB1 User Manual

35D-Link DCS-5222LB1 User Manual
Section 4 - Conguration
Enable CoS:
Enable QoS:
Enable IPV6:
Enable
Multicast for
stream
the address of a particular stream. For instance,
live1.sdp can be accessed at rtsp://x.x.x.x/video1.
sdp where the x.x.x.x represents the ip address of
your camera.
Enabling the Class of Service setting implements a
best-eort policy without making any bandwidth
reservations.
Enabling QoS allows you to specify a trac priority
policy to ensure a consistent Quality of Service
during busy periods. If the network camera is
connected to a router that itself implements QoS,
the router's settings will override the QoS settings
of the camera.
Enable the IPV6 setting to use the IPV6 protocol.
Enabling the option allows you to manually set up
the address, specify an optional IP address, specify
an optional router and an optional primary DNS.
The DCS-5222LB1 allows you to multicast each
of the available streams via group address and
specify the TTL value for each stream. Enter the
port and TTL settings you wish to use if you do not
want to use the defaults.

D-Link DCS-5222LB1 Specifications

General

Brand	D-Link
Model	DCS-5222LB1
Category	Security Camera
Language	English