D-Link DCS-5222LB1 - Add Event

51D-Link DCS-5222LB1 User Manual
Section 4 - Conguration
Add Event
Create and schedule up to 2 events with their own settings here. After making any changes, click the Save Settings button to save your changes.
Event name:
Enable this
event:
Priority:
Delay:
Trigger:
Video Motion
Detection:
Periodic:
Digital input:
System Boot:
Network Lost:
Enter a name for the event.
Select this box to activate this event.
Set the priority for this event. The event with
higher priority will be executed rst.
Select the delay time before checking the next
event. It is being used for both events of mo-
tion detection and digital input trigger.
Specify the input type that triggers the event.
Motion is detected during live video monitor-
ing. Select the windows that need to be moni-
tored.
The event is triggered in specied intervals. The
trigger interval unit is in minutes.
The external trigger input to the camera.
Triggers an event when the system boots up.
Triggers an event when the network connec-
tion is lost.