57D-Link DCS-5222LB1 User Manual
Section 4 - Conguration
Time Stamp:
Calibrate the
Device:
LED Light:
Privacy Mode:
If checked, the current time will be displayed on
the OSD.
Clicking this button will calibrate the camera so
that the P/T/Z apparatus functions correctly. The
camera is automatically calibrated whenever it is
powered on and initialized or reset. Should the
camera’s pan, tilt, and zoom functions begin to
behave incorrectly, or if the device has been jarred
or handled improperly, you may need to recalibrate
the camera manually by pressing this button.
This will turn the camera’s front LED indicator on
or o.
Select on/o or schedule the privacy mode for your
camera to ensure privacy. When the privacy mode
is turned on, the camera hides the lens by rolling it
back into the unit.
After making any changes, click the Save button to
save your changes.
To Next Page
Loading...
Need help?
General
