D-Link DCS-5222LB1 User Manual

66D-Link DCS-5222LB1 User Manual
Section 5 - Security
The following steps generally apply to any router that you have on your network. The D-Link DIR-655 is used as an example to clarify the conguration
process. Refer to the router’s user manual for more information on router operation and conguration.
3. Access the Router with Your Web Browser
If you have cable or DSL Internet service, you will most likely have
a dynamically assigned WAN IP Address. ‘Dynamic’ means that your
router’s WAN IP address can change from time to time depending
on your ISP. A dynamic WAN IP Address identies your router on the
public network and allows it to access the Internet. To nd out what
your router’s WAN IP Address is, go to the Status page on your router
and locate the WAN information for your router (as shown on the next
page). The WAN IP Address will be listed. This will be the address that
you will need to type in your web browser to view your camera over
the Internet.
Router Set-Up and Installation
Your WAN IP Address will be listed on the router’s Status > Device
Info page.

D-Link DCS-5222LB1 Specifications

General

Brand	D-Link
Model	DCS-5222LB1
Category	Security Camera
Language	English