102
DCS-6620 User’s Manual
D-Link Systems, Inc.
Using IP surveillance Software
Video channel
IP address
Location
Scheduling (continued)
The layout of the scheduler is roughly divided into 4 parts:
Part 1
The first part of the scheduler is the video channel selection area. It provides
the IP addresses and location information of the connected video channels for
the user’s reference. You can select a video channel in this area and create a
schedule for it.
Part 2
The second part is the Primary schedule settings. It consists of the
day time-line
, week time-line, begin time selector, end time selector, and event
mode settings.
Part 3
The third part is the Secondary schedule, which consists of event mode
settings.
Part 4
The fourth part contains the operation buttons for the user to manipulate the
edited schedule of the selected video channel. The scheduler can be closed
from here.
The Functionalities of Configuration Components
The four main parts of the scheduler have been briefly described in the section above. Parts
1-4 will be described in detail in the following section.
To Next Page
Loading...
