18
DCS-6620 User’s Manual
D-Link Systems, Inc.
Enabling UPnP
TM
for Windows
®
XP
Enabling UPnP for Windows
®
XP
UPnP
TM
is short for Universal Plug and Play, which is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. The DCS-6620 is a UPnP
enabled PTZ Internet Camera. If your operating system is UPnP enabled, the device will be
easier to configure. If you do not want to use the UPnP functionality, it can be disabled by
unselecting “Enabled” on the DDNS/UPnP settings page under “Advanced” in the configuration
menu. Use the following steps to enable UPnP (Universal Plug and Play) settings only if you
are running Windows XP. If you are running Windows 2000, UPnP is not available.
Click Control Panel
Go to Start >Settings.
Click Add or Remove
Programs
TM
To Next Page
Loading...
Need help?
General