17
DCS-6620 User’s Manual
D-Link Systems, Inc.
Installation Wizard Screen
Reset to Default
About
Exit
Click the Exit tab to exit the Installation Wizard screen.
Click About to display the current version and
date of the Installation Wizard.
Click the Reset to Default tab to reset the camera’s settings to factory defaults.
Locate the
Firmware to
Upgrade:
Allows you to browse to the location
of the firmware to be uploaded to
the camera.
Selected
Package:
This displays the file name of the
firmware selected for upload.
Upgrade
The upgrade window allows users to upload a
saved firmware file. If the firmware is older than
that currently on the camera, a screen will appear
indicating so and prompting the user to confirm
the upload.
Package
Information:
This displays information about
the firmware and plugin currently
installed on the camera.
To Next Page
Loading...
Need help?
General