How to reset D-Link DCS-8000LH if I forgot the password?
If you've forgotten the password for your D-Link Security Camera, you should perform a factory reset. This will revert all settings back to their factory defaults.
General| Type | IP security camera |
|---|---|
| Certification | CE, CE LVD, ICES, FCC |
| Placement supported | Indoor |
| Connectivity technology | Wireless |
| Infrared (IR) cut-off filter | Yes |
| Sensor type | CMOS |
| Effective sensor resolution | 1000000 pixels |
| Digital zoom | 4 x |
| Fixed focal length | 2.45 mm |
| Maximum aperture number | 2.4 |
| Closest focusing distance | 0.5 m |
| Audio formats supported | PCM |
| Minimum illumination | - lx |
| Maximum resolution | 1280 x 720 pixels |
| Supported video modes | 720p |
| Video formats supported | H.264 |
| Image quality adjustment | Brightness |
| Security algorithms | WPA, WPA2 |
| Alert notification type | Snapshot alert message, Text alert message |
| Ethernet LAN | No |
| Frequency band | 2.4 GHz |
| Wi-Fi standards | 802.11g, Wi-Fi 4 (802.11n) |
| Supported network protocols | IPv4, ARP, TCP, UDP, ICMP, NTP client (D-Link), DNS client, RTP/RTSP/RTCP, Bonjour |
| Mobile operating systems supported | Android, iOS |
| AC input voltage | 100 - 20 V |
| DC output current | 1 A |
| DC output voltage | 5 |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 4 W |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Number of cameras | 1 |
| Form factor | - |
| Mounting type | Desk |
| Product color | White |
| LED type | IR |
| Night vision distance | 5 m |
| Interface | WLAN |
Weight and Dimensions| Depth | 35 mm |
|---|---|
| Width | 38 mm |
| Height | 92 mm |
| Weight | 57.7 g |
To Next Page
