25D-Link DCS-910 User Manual
Section 3 - Configuration
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to configure your
new D-Link Camera and connect the camera to the Internet.
Click Next to proceed.
You may configure your camera using
• DHCP Connection (by default), where your DHCP server will automatically
assign dynamic IP to your device.
• Static IP Address, or
• PPPoE connection, where your camera is directly connected to the
Internet through a DSL modem.
* Input the DNS information if you have chosen and assigned a Static IP
Address for your camera.
Click Next to proceed.
Click Next
Click Next
To Next Page
Loading...
