D-Link DCS-910 User Manual

28D-Link DCS-910 User Manual
Section 3 - Configuration
(Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it has been modified.
The username and password are required when using the DDNS service.
Click to enable the DDNS function.
Select your Dynamic DNS Server from the pull down menu.
Enter the host name of the DDNS server.
Enter your username or e-mail used to connect to the DDNS.
Enter your password used to connect to the DDNS server.
DDNS:
Enable:
Server Address:
Host Name:
User Name:
Password:
Setup > DDNS
In this section, you can congure the DDNS setting for your
camera. DDNS will allow all users to access your camera using
a domain name instead of an IP address.

D-Link DCS-910 Specifications

General

Brand	D-Link
Model	DCS-910
Category	Security Camera
Language	English