D-Link DCS-910

33D-Link DCS-910 User Manual
Section 3 - Configuration
Setup > FTP
FTP Server
Host Address:
Port Number:
User Name:
Password:
Directory Path:
Passive Mode:
This is the IP address of the FTP server that you will be connecting to.
Default is port 21. If changed, external FTP client program must change the server
connection port accordingly.
Species the user name to access the external FTP server. If you are to upload
snapshots to an FTP server you will need to fill in the Domain name or IP address of
your external FTP server. The following user settings must be correctly congured
for remote access.
Species the password to access the external FTP server.
Species the destination folder in the external FTP server.
Enabling passive mode will allow access to an external FTP server if your camera
is behind a router protected by a firewall.
In this section, you can congure a FTP server to receive the images.