10/100 Fast Ethernet Switch User’s Guide
Introduction
5
mode, any four ports can provide their workstations with a simultaneous
access, congestion-free 800 Mbps data pipe to the server.
The Switches are expandable by cascading two or more Switches together.
As all ports support 200 Mbps full-duplex, the Switches can be cascaded
from any port to any number of switches.
The Switches are a perfect choice for site planning to upgrade to Gigabit
Ethernet in the future
The Switch combines dynamic memory allocation with store-and-forward
switching to ensure that the buffer is effectively allocated for each port;
while, data flow is controlled between the transmitting and receiving nodes
to guarantee against all possible packet loss.
The Switch is unmanaged, but a smart, 10/100 Fast Ethernet switch that
offers solutions to improve the performance of multiple workstations using
shared resources.
Performance features
♦
Provides 4 or 6 trunking links for up to 800 Mbps data links, each,
depending on DES-1016 or DES-1024 model respectfully.
♦
Supports up to 8 or 16 (depending on model) port-based VLANs.
♦
16 or 24 UTP/STP ports (depending on model) all come with Nway
auto-Negotiation and operate at 10/100 Mbps for connection to servers
and hubs. All ports can auto-negotiate for full or half-duplex operation.
♦
Two up-Link ports to cascade 2 relative devices in 200 Mbps full-duplex
mode or adapt to an external interface with 2 km connectivity
(100BASE-FX).
♦
One slot (plug-in) module with 2 ports to support either 10BASE-T,
100BASE-TX or 100BASE-FX.
To Next Page
Loading...
