D-Link DES-3052P - Page 119

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
114
Command: disable mirror
Success.
DES-3028P:4#
show mirror
Purpose Used to show the current port mirroring configuration on the Switch.
Syntax
show mirror
Description This command displays the current port mirroring configuration on
the Switch.
Parameters None
Restrictions None.
Example usage:
To display mirroring configuration:
DES-3028P:4#show mirror
Command: show mirror
Current Settings
Mirror Status : Enabled
Target Port : 1
Mirrored Port :
RX :
TX : 5-7
DES-3028P:4#