DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
273
39
ASYMMETRIC VLAN COMMANDS
The asymmetric VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
enable asymmetric_vlan
disable asymmetric_vlan
show asymmetric_vlan
Each command is listed, in detail, in the following sections.
enable asymmetric_vlan
Purpose Used to enable the asymmetric VLAN function on the Switch.
Syntax
enable asymmetric_vlan
Description This command enables the asymmetric VLAN function on the Switch
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To enable asymmetric VLANs:
DES-3028P:4#enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
DES-3028P:4#
disable asymmetric_vlan
Purpose Used to disable the asymmetric VLAN function on the Switch.
Syntax
disable asymmetric_vlan
Description This command disables the asymmetric VLAN function on the Switch
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To disable asymmetric VLANs:
DES-3028P:4#disable asymmetric_vlan
Command: disable asymmetric_vlan
Success.
DES-3028P:4#
To Next Page
Loading...
