DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
117
To delete ports from a VLAN:
DES-3028P:4#config vlan v1 delete 6-8
Command: config vlan v1 delete 6-8
Success.
DES-3028P:4#
create vlan vlanid
Purpose Used to create multiple VLANs by VLAN ID list on the switch.
Syntax
create vlan vlanid <vidlist> { advertisement }
Description The create vlans by vlanid list command creates multiple VLANs on
the switch.
Parameters
<vidlist> Specifies a range of multiple VLAN IDs to be created.
advertisement Join GVRP or not. If not, the VLAN can’t join
dynamically.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To create VLAN ID on the switch:
DES-3028P:4#create vlan vlanid 5 advertisement
Command: create vlan vlanid 5 advertisement
Success
DES-3028P:4#
delete vlan vlanid
Purpose Used to delete multiple VLANs by VLAN ID on the switch.
Syntax
delete vlan vlanid <vidlist>
Description The delete vlan by vlan id list command deletes previously
configured multiple VLANs on the switch.
Parameters
<vidlist> Specifies a range of multiple VLAN IDs to be deleted.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete VLAN ID on the switch:
DES-3028P:4#delete vlan vlanid 5
Command: delete vlan vlanid 5
Success
DES-3028P:4#
config vlan vlanid
Purpose Used to add additional ports to a previously configured VLAN.
To Next Page
Loading...
