D-Link DES-3052P - Page 131

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
126
show lacp_port
Purpose Used to display current LACP port mode settings.
Syntax
show lacp_port {<portlist>}
Description This command will display the LACP mode settings as they are
currently configured.
Parameters
<portlist>  Specifies a port or range of ports to be configured.
If no parameter is specified, the system will display the current LACP
status for all ports.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To display LACP port mode settings:
DES-3028P:4#show lacp_port 1-10
Command: show lacp_port 1-10
Port Activity
------ --------
1 Active
2 Active
3 Active
4 Active
5 Active
6 Active
7 Active
8 Active
9 Active
10 Active
DES-3028P:4#