D-Link DES-3052P - Switch Log

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
183
config time_range
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure the time range time1 to be between 6:30 a.m. and 9:40 p.m., Monday to Friday:
DES-3028P:4#config time
_
range time1 hours start
_
time 6:30:00
end_time 21:40:00 weekdays mon-fri
Command: config time
_
range time1 hours start
_
time 6:30:00
end_time 21:40:00 weekdays mon-fri
Success.
DES-3028P:4#
show time_range
Purpose To view the current configurations of the time range set on the Switch.
Syntax
show time_range
Description This command is used to display the currently configured time
range(s) set on the Switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To view the current time range settings.
DES-3028P:4#show time_range
Command: show time_range
Time Range information
--------------------------------------------
Range name : time1
Weekdays : Mon,Tue,Wed,Thu,Fri
Start time : 06:30:00
End time : 21:40:00
Total entries: 1
DES-3028P:4#