D-Link DES-3052P - Auth Diagnostics

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
191
DES-3028P:4#config time 30jun2003 16:30:30
Command: config time 30jun2003 16:30:30
Success.
DES-3028P:4#
config time_zone
Purpose Used to determine the time zone used in order to adjust the system
clock.
Syntax
config time_zone {operator [+ | -] | hour <gmt_hour 0-13> | min
<minute 0-59>}
Description This will adjust system clock settings according to the time zone.
Time zone settings will adjust SNTP information accordingly.
Parameters operator – Choose to add (+) or subtract (-) time to adjust for time
zone relative to GMT.
hour – Select the number of hours different from GMT.
min – Select the number of minutes difference added or subtracted
to adjust the time zone.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure time zone settings:
DES-3028P:4#config time_zone operator + hour 2 min 30
Command: config time_zone operator + hour 2 min 30
Success.
DES-3028P:4#