DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
244
DES-3028P:4#show sim group
Command: show sim group
SIM Group Name : default
ID MAC Address Platform / Hold Firmware Device Name
Capability Time Version
--- ----------------- ------------------- ----- --------- ----------------
*1 00-01-02-03-04-00 DES-3028P L2 Switch 40 2.00.B23 Trinity
2 00-55-55-00-55-00 DES-3028P L2 Switch 140 2.00.B23 default master
SIM Group Name : SIM2
ID MAC Address Platform / Hold Firmware Device Nam
Capability Time Version
--- --------------- ----------------- ------ --------- ----------------
*1 00-01-02-03-04-00 DES-3028P L2 Switch 40 1.00.B23 Neo
2 00-55-55-00-55-00 DES-3028P L2 Switch 140 1.00.B23 default master
‘*’ means commander switch.
DES-3028P:4#
Example usage:
To view SIM neighbors:
DES-3028P:4#show sim neighbor
Command: show sim neighbor
Neighbor Info Table
Port MAC Address Role
------ ---------------- ---------
23 00-35-26-00-11-99 Commander
23 00-35-26-00-11-91 Member
24 00-35-26-00-11-90 Candidate
Total Entries: 3
DES-3028P:4#
reconfig
Purpose Used to connect to a member switch, through the commander switch,
using Telnet.
Syntax
reconfig {member_id <value 1-32> | exit}
Description This command is used to reconnect to a member switch using Telnet.
Parameters
member_id <value 1-32> Select the ID number of the member switch
to configure.
exit – This command is used to exit from managing the member switch
and will return to managing the commander switch.
To Next Page
Loading...
