DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
288
config mcast_filter_profile
Purpose This command configures a multicast addresses profile.
Syntax
config mcast_filter_profile [profile_id < value 1-24>|
profile_name <name> ] { profile_name <name> | [add | delete ]
<mcast_address_list>}
Description This command is used to configure the multicast filter profiles.
Parameters
profile_id ID of the profile.
profile_name Provides a meaningful description for the profile.
<mcast_address_list> List of the multicast addresses to be put in
the profile.
You can either specify a single multicast IP address or a range of
multicast addresses.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure an mcast filter profile:
DES-3028P:4# config mcast_filter_profile profile_id 2 add
225.1.1.1 - 225.1.1.1
Command: config mcast_filter_profile profile_id 2 add 225.1.1.1 -
225.1.1.1
Success.
DES-3028P:4#
delete mcast_filter_profile
Purpose This command deletes a multicast address profile.
Syntax
delete mcast_filter_profile profile_id [<value 1-24> | all]
Description This command deletes a multicast address profile
Parameters
profile_id ID of the profile
all All multicast address profiles will be deleted.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete a multicast address profile:
DES-3028P:4# delete mcast_filter_profile profile_id 3
Command: delete mcast_filter_profile profile_id 3
Success.
DES-3028P:4#
delete mcast_filter_profile
Purpose This command deletes a multicast address profile.
Syntax
delete mcast_filter_profile profile_name <name 1-32>
To Next Page
Loading...
