D-Link DES-3052P - Page 318

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
313
Example usage
To disable dos_prevention trap_log :
DES-3028P:4# disable dos_prevention trap_log
Command: disable dos_prevention trap_log
Success.
DES-3028P:4#
show dos_prevention
Purpose Used to display DoS prevention information.
Syntax
show dos_prevention { land_attack | blat_attack | smurf_attack |
tcp_null_scan | tcp_xmascan | tcp_synfin |
tcp_syn_srcport_less_1024 }
Description The show dos_prevention command displays DoS prevention
information, includes the type of DoS attack, the prevention state, the
corresponding action if the prevention is enabled and the counter
information of the DoS packet.
Parameters
dos  The type of DoS attack. Possible values are as follows:
 land_attack
 blat_attack
 smurf_attack
 tcp_null_scan
 tcp_xmascan
 tcp_synfin
 tcp_syn_srcport_less_1024
Restrictions Only Administrator-level users can issue this command.