D-Link DES-3052P - Page 331

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
326
Example usage
To address_binding dhcp_snoop binding_entry:
DES-3028P:4# clear address
_
binding dhcp
_
snoop binding
_
entry
ports 1-3
Command: clear address
_
binding dhcp
_
snoop binding
_
entry ports
1-3
Success.
DES-3028P:4#
config address_binding dhcp_snoop max_entry
Purpose Specifies the max number of entries which can be learned by the
specified ports.
Syntax
config address_binding dhcp_snoop max_entry ports [<portlist> |
all] limit [<value 1-10> | no_limit]
Description By default, the per port max entry is 5.
This command specifies the max number of entries which can be learned
by the specified ports.
Parameters <portlist> – Specifies the list of ports that you would like to set the
maximum dhcp-snoop learned entry.
limit – Specifies the maximum number.
Restrictions Only Administrator-level users can issue this command.
Example usage
To set the maximum number of entries that ports 1-3 can learn to 10:
DES-3028P:4# config address
_
binding dhcp
_
snoop max
_
entry ports
1-3 limit 10
Command: config address_binding dhcp_snoop max_entry ports 1-3
limit 10
Success.
DES-3028P:4#