DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
39
Example usage:
To create the SNMP community string “dlink:”
DES-3028P:4#create snmp community dlink view ReadView
read_write
Command: create snmp community dlink view ReadView
read_write
Success.
DES-3028P:4#
delete snmp community
Purpose Used to remove a specific SNMP community string from the Switch.
Syntax
delete snmp community <community_string 32>
Description The delete snmp community command is used to remove a
previously defined SNMP community string from the Switch.
Parameters
<community_string 32> An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch’s SNMP agent.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete the SNMP community string “dlink:”
DES-3028P:4#delete snmp community dlink
Command: delete snmp community dlink
Success.
DES-3028P:4#
show snmp community
Purpose Used to display SNMP community strings configured on the Switch.
Syntax
show snmp community {<community_string 32>}
Description The show snmp community command is used to display SNMP
community strings that are configured on the Switch.
Parameters
<community_string 32> An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch’s SNMP agent.
Restrictions None.
Example usage:
To display the currently entered SNMP community strings:
To Next Page
Loading...
