DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
88
DES-3028P:4#create fdb default 00-00-00-00-01-02
port 5
Command: create fdb default 00-00-00-00-01-
2 port
5
Success.
DES-3028P:4#
create multicast_fdb
Purpose Used to create a static entry to the multicast MAC address
forwarding table (database)
Syntax
create multicast_fdb <vlan_name 32> <macaddr>
Description This command will make an entry into the Switch’s multicast MAC
address forwarding database.
Parameters
<vlan_name 32> The name of the VLAN on which the MAC
address resides.
<macaddr> The MAC address that will be added to the forwarding
table.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To create multicast MAC forwarding:
DES-3028P:4#create multicast_fdb default 01-00-00-
00-00-01
Command: create multicast_fdb default 01-00-00-00-
00-01
Success.
DES-3028P:4#
config multicast_fdb
Purpose Used to configure the Switch’s multicast MAC address forwarding
database.
Syntax
config multicast_fdb <vlan_name 32> <macaddr> [add | delete]
<portlist>
Description This command configures the multicast MAC address forwarding
table.
Parameters
<vlan_name 32> The name of the VLAN on which the MAC
address resides.
<macaddr> The MAC address that will be added to the multicast
forwarding table.
[add | delete] add will add ports to the forwarding table. delete will
remove ports from the multicast forwarding table.
<portlist> Specifies a port or range of ports to be configured.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To add multicast MAC forwarding:
To Next Page
Loading...
