DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
100
To establish the rule for a previously created Access Profile Mask:
Select the Access Profile from the Access Profile Mask Setting Table and click the Edit Rule button.
Figure 6 - 85. Access Profile Rule Setting
To create a new rule set for the access profile click the New button. A new menu is displayed. To remove a previously created
rule, select it and lick the Delete button.
Figure 6 - 86. Add Access Profile Rule
Configure the following Access Profile Rule settings:
Parameter Description
Profile ID
This is the identifier number for this profile set.
Access Rule ID
Type in a unique identifier number for this access. This value can be set from 1 – 255.
priority
Select this option to instruct the Switch to use the 802.1p priority value entered in the
adjacent field for packets that meet the criteria. A number between 0 − lowest priority,
and 7 − highest priority, can be entered.
replace_priority
Select this option to instruct the Switch to replace the 802.1p value (in a packet that
meets the selected criteria). In this way, packets meeting the criteria can have their
priority handling modified for use within the Switch, and then have a different priority value
assigned when they leave the Switch.
replace_dscp:
Select this option to instruct the Switch to replace the DSCP value (in a packet that meets
the selected criteria) with the value entered in the adjacent field.
To Next Page
Loading...
