DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
38
Configuring the Switch
To begin managing your Switch simply run the browser you have installed on your computer and point it to the IP address you
have defined for the device. The URL in the address bar should read something like: http://123.123.123.123, where the
numbers 123 represent the IP address of the Switch.
NOTE: The Factory default IP address for the Switch is 10.90.90.90 with a Netmask 255.0.0.0.
In the page that opens, click on the Login hyperlink. This opens the management module’s main page.
Figure 6- 1. Welcome Page
The Switch management features available in the web-based manager are explained below.
To Next Page
Loading...
