DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
61
Parameter Description
View Name
Type an alphanumeric string of up to 32 characters. This is used to identify the new
SNMP view being created.
Subtree
Type the Object Identifier (OID) Subtree for the view. The OID identifies an object tree
(MIB tree) that will be included or excluded from access by an SNMP manager.
View Type
Select Included to include this object in the list of objects that an SNMP manager can
access. Select Excluded to exclude this object from the list of objects that an SNMP
manager can access.
SNMP Group Table
The SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in the
previous menu.
Figure 6 - 26. SNMP Group Table
To delete an existing entry, click the selection button on the far left that corresponds to the port you want to configure and click
the Delete button. To create a new entry, click the New button, a separate menu will appear.
Figure 6 - 27. SNMP Group – Add New
To Next Page
Loading...
