DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
46
To use the BOOTP or DHCP protocols to assign the Switch an IP address, subnet mask, and default gateway address:
Use the Get IP From: <Manual> pull-down menu to choose from Manual, BOOTP, or DHCP. This selects how the Switch
will be assigned an IP address on the next reboot.
Figure 6 - 9. Basic Switch Setup
NOTE: The factory default IP address for the Switch is 10.90.90.90 with a subnet mask of 255.0.0.0
and a default gateway of 0.0.0.0.
To Next Page
Loading...
