DES-3226S Layer 2 Fast Ethernet Switch User’s Guide
59
Daylight Savings Time settings can be enabled and set using either a formula for Repeating DST settings or using a definitive
date, Annual DST settings.
Parameter Description
DST State
Enable or Disable the DST seasonal time adjustment for the Switch.
DST Offset (in minutes)
Time Zone Offset (+/- GMT)
Choose to add (+) or subtract (-) time to adjust for time zone relative to GMT.
DST Repeating Settings
From Which Week (of the
month)?
Select the week of the month in which DST begins.
From Which Day (of the
week)?
Select the day of the week in which DST begins.
From Which Month?
Select the month in which DST begins.
From What Time HH:MM?
Select the time of day to begin DST. Time is expressed using a 24-hour clock
using the hour and minute only.
To Which Week?
Select the week of the month in which DST ends.
To Which Day?
Select the day of the week in which DST ends.
To Which Month?
Select the month in which DST ends.
To What Time HH:MM?
Select the time of day to end DST. Time is expressed using a 24-hour clock.
DST Annual Settings
From What Month?
Select the month in which DST begins.
From What Date?
Choose the specific date (day of the month) to begin DST.
From What Time?
Select the time of day to begin DST. Time is expressed using a 24-hour clock using
the hour and minute only.
To What Month?
Select the month in which DST ends.
To What Date?
Choose the specific date (day of the month) to begin DST.
To What Time?
Select the time of day to end DST. Time is expressed using a 24-hour clock.
To Next Page
Loading...
