DES-3550 Fast Ethernet Layer 2 Switch
Figure 7- 12. Login Method List - Edit (default)
Figure 7- 13. Login Method List - Add
To define a Login Method List, set the following parameters and click Apply:
Parameter Description
Method List Name
Enter a method list name defined by the user of up to 15 characters.
Method 1, 2, 3, 4
The user may add one, or a combination of up to four (4) of the following
authentication methods to this method list:
•
•
•
•
•
•
•
tacacs - Adding this parameter will require the user to be authenticated
using the TACACS protocol from a remote TACACS server.
xtacacs - Adding this parameter will require the user to be authenticated
using the XTACACS protocol from a remote XTACACS server.
tacacs+ - Adding this parameter will require the user to be authenticated
using the TACACS+ protocol from a remote TACACS+ server.
radius - Adding this parameter will require the user to be authenticated using
the RADIUS protocol from a remote RADIUS server.
server_group - Adding this parameter will require the user to be
authenticated using a user-defined server group previously configured on
the Switch.
local - Adding this parameter will require the user to be authenticated using
the local user account database on the Switch.
none - Adding this parameter will require no authentication to access the
Switch.
121
To Next Page
Loading...
