DES-3550 Fast Ethernet Layer 2 Switch
The following parameters can set:
Parameter Description
View Name
Type an alphanumeric string of up to 32 characters. This is used to identify the new
SNMP view being created.
Subtree OID
Type the Object Identifier (OID) Subtree for the view. The OID identifies an object tree
(MIB tree) that will be included or excluded from access by an SNMP manager.
View Type
Select Included to include this object in the list of objects that an SNMP manager can
access. Select Excluded to exclude this object from the list of objects that an SNMP
manager can access.
To implement your new settings, click Apply. To return to the SNMP View Table, click the Show All SNMP View Table
Entries link.
SNMP Group Table
An SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in the
previous menu. To view the SNMP Group Table, open the SNMP Manager folder in the Secuirty Management folder
and click the SNMP Group Table entry. The following screen should appear:
Figure 7- 31. SNMP Group Table
To delete an existing SNMP Group Table entry, click the corresponding
under the Delete heading.
To display the current settings for an existing SNMP Group Table entry, click the hyperlink for the entry under the
Group Name.
137
To Next Page
Loading...
